Your 2006 Keystone Montana 3000RK was not pre-wired for a backup camera. You will need to either capture constant 12V power for the observation camera from the running light circuit or you can capture power from just the reverse light for use only when vehicle is shifted into reverse.
I don't have a wiring schematic for your trailer, but I recommend capturing the running light power from the license plate light to power your backup camera. You can use the circuit tester # PTW2993 to... view full answer...
While the 2020 3810ms Montana 5th Wheel Trailers are pre-wired for the Furrion Vision S Wireless RV Backup Camera Systems; part # FOS43TASF for 4.3" screen or part # FOS05TASF for 5" screen, there isn't a backup/observation camera system for trailers that uses a factory monitor.
The best option would be to just use the Furrion Vision S Wireless RV Backup Camera Systems that the Montana is wired for. view full answer...
The license plate bracket for the Hopkins Smart Hitch Backup Camera # HM50002 is indeed made up of a durable plastic. This keeps it strong enough to hold up to everyday use while also eliminating any concerns over rust and corrosion since it's going to be sitting out in the elements.
I have attached a short video demonstration on this system that you can check out as well. view full answer...
For something to be considered waterproof it has to be able to be submerged under water for a certain amount of time and not let any water inside. To that end, the Hopkins backup camera # HM50002 is not waterproof. But it can be used in the rain. I had one of these camera systems on a vehicle for years, rain, snow, and shine, and it worked perfectly the entire time I owned that vehicle. I even linked the video showing us installing it on my old car. view full answer...
The license plate bracket (Part C) of the Hopkins Smart Hitch Backup Camera # HM50002 is made of 1/2 inch plastic so cutting it wouldn't cause any camera issues. Although it might not be necessary. The camera can easily be detached from the bracket and the sensors can be too using a screw driver. So it might work better for you to install it this way. view full answer...
The MORryde Jerry Can Mount for Spare Tire # MR99MR is made in the USA. This tray lets you transport fuel in a Scepter or NATO-style gas can, but I do need to mention that this is not compatible with Jeep Wrangler JL models due to the factory backup camera location. So just a heads up on that. view full answer...
Go To Results